Pro-spec Easy Clutch for Bajaj Dominar 250 – EC Pro – EC220
City commutes are made easier with the Easy Clutch Pro from Pro-Spec a mechanical assist device that reduces clutch effort by up to 40% when applied to the lever. Designed with Indian traffic conditions in mind and built to global standards, this model is a game-changer for gear-shifting comfort in traffic and touring scenarios.
Manufactured using aerospace-grade aluminum, the Easy Clutch Pro is an inline extension of the OE clutch cable, making gear shifts smoother and reducing hand fatigue.
Key Features
Aerospace-grade aluminum housing
Universal fitment across many motorcycle models
Custom-tuned for Indian road/riding conditions
Simple mechanical extension of the OE cable
Conforms to global standards
Kit Contents
Sl.
Description
Part Number
Qty
1
Aluminum Housing
PS EC 200-1
1 No
–
Allen Screws + Washers
PS SSACS 0308, PS SS SW 03
3 Nos
–
Fulcrum Assembly (incl. Bearing, Washer, Pin)
PS EC 200-2/3/4/6
1 Set
2
Easy Clutch Short Cable
PS AFG-CLC-00219
1 No
3
Dust Boot
PS EC BO 01
1 No
4
Cable Tie
PS EC 200-7
1 No
5
Cable Adjuster
PS EC BO 200-8
1 No
6
2.5 mm Allen Key
PS HTAK 2.5
1 No
Installation Instructions
Remove the OE clutch cable from the lever (Fig. A) and loosen the engine yoke adjuster (Fig. B) to free the cable.
Disassemble the Pro-Spec housing by removing the 3 screws.
Insert the OE clutch cable head into the fulcrum inside the housing (Fig. C).
Connect the Pro-Spec short cable to the other side of the housing (Fig. C).
Fit the short cable to the clutch lever, placing the dust boot properly.
Secure and reassemble the housing using the screws provided.
Adjustment Guidelines
Adjust the clutch release point to approximately 50% of lever movement.
If below 40% Thread OUT adjuster (Fig-D)
If above 60% Thread IN adjuster (Fig-E)
Fine-tune the engine-side yoke (Fig. F & G):
Adjust a to bring the release point closer to the grip
-50%
